![]() |
||
![]() |
![]() |
![]() |
![]() |
|
#1
|
|||
|
|||
![]()
Just about finished up with my MM torque arm install, I'm hoping it helps with things like this https://www.youtube.com/watch?v=1wBz80EMIr4
Do my fellow fox/sn95 guys see a major gain with the 3 link over the factory 4 link setup?? |
#2
|
|||
|
|||
![]()
I found the torque arm allowed me to lay down more power and improved corner exit speed
|
#3
|
|||
|
|||
![]()
The old Bondurant cars had a torque arm.
I loved the way it drove. Very Constant , Extremely durable, easy to tune and install . much better than the factory splayed 4 link. I do not think it is the ultimate handling answer. But a big step in the right direction ![]() |
#4
|
|||
|
|||
![]()
thanks for the feedback guys, it sounds like it really helps the weight transfer. Probably due to the factory setup causing bind, slowing/damping the weight transfer under throttle.
|
#5
|
|||
|
|||
![]()
When is the maiden voyage for the new suspension? VIR or Summit point in April?
|
#6
|
|||
|
|||
![]()
With the season I had last year I'm not too confident in making the long haul down to VIR without a few solid major breakdown free weekends, under my belt LOL. Last year I learned a lot of different ways to break stuff and hopefully this year I can cut that down by a few percentage points
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|