Go Back   American Sedan Forum > Main American Sedan Categories > American Sedan News > News and Newsletters from Old Website

Reply
 
Thread Tools Display Modes
  #1  
Old 10-02-2004, 09:22 AM
jkopp's Avatar
jkopp jkopp is offline
Administrator
 
Join Date: Sep 2004
Location: Wellsville, KS
Posts: 1,161
Default 2002 News Archive

2002 NEWS ARCHIVE



March

Tech Bulletin
  • Ford Mustang (94-98), Includes Cobra through 1995, p.77, correct specs as follows: "Weight (lbs): 3280". This is a correction to the weight change that was instituted in TB02-02. It is the intent of the Competition Board to make these cars weigh the same as the Chevrolet Camaro.
  • Ford Mustang (99-01), Includes Cobra, p.77, add 2002 model year. Correct specs as follows: "Weight (lbs): 3280". This is a correction to the weight change that was instituted in TB02-02. It is the intent of the Competition Board to make these cars weigh the same as the Chevrolet Camaro.
  • Chevrolet Camaro (82-92), p.77, correct specs in "Notes" section as follows: "Harwood fiberglass hood (P/N 12100) is permitted." The part number currently allowed is for the Pontiac Firebird.
February

The following items are not recommended at this time
  • Create a spec tire for American Sedan. Insufficient member interest in establishing a spec tire.
  • Add additional alternate transmission models. The alternate transmissions selected were determined to beht most appropriate for racing conditions.
Tech Bulletin
  • Chevrlet Camaro (93-99), p. 77, add 2000, 2001, & 2002 model years.
  • Ford Mustang (94-98), Includes Cobra through 1995, p. 77, change specs as follows: "Weight: 3230".
  • Ford Mustang (99-01), Includes Cobra, p. 77, add 2002 model year. Change specs as follows: "Weight: 3230".
  • Pontiac Firebird (93-99), p. 78, add 2000, 2001, & 2002 model years.
January

Tech Bulletin
  • Add the following wording to Section 17.1.7.D.3., p.58-59 to assist in installing alternate transmissions: "d. Hardware items (nuts, bolts, etc) may be replaced by similar items performing the same fastening function(s). Driveshaft may be modified to fin alternate differentials and/or transmissions. Facotry driveshats may be replaced with any one-peice driveshaft of steel or aluminum construction. Minimum driveshaft diameter shall be no smaller than stock. k. Richmand "Super T-10 Race Ready transmissions (GM-R0141640, Ford R0241640) may be used, but the "CC" ratios must be installed - 2.88, 1.91, 1.33, 1.00. An alternate bellhousing may be used to facilitate installation. l. Tremec TKO transmissions may be used, but the 1995 Cobra R ratios must be installed - 3.27, 1.98, 1.34, 1.00, 0.68. An alternate bellhousing may be used to facilitate installation. m. When alternate transmissions are installed, transmission crossmembers must be modified to insure that engine location is kept in its original location and to facilitate installation of the transmission. n. Concentric hydaulic clutch release bearings bay be used to facilitate the installation of alternate transmissions on GM cars only."
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:28 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.