Go Back   American Sedan Forum > Main American Sedan Categories > American Sedan Technical

Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2020, 12:13 PM
GreggDitzian GreggDitzian is offline
Junior Member
 
Join Date: Mar 2020
Posts: 1
Default Edelbrock is Gone!

Thank you for submitting a request/input to the Club Racing Board. The details of your request can be found below.
Letter ID Number: #28696
Title: Cylinder Heads
Class: AS
Request: Review the Edelbrock 608979, 608879 as these are nomore and according to Eddelbrock they will not resume making them. I checked with Edelbrock, Summit and Jegs they all said discontinued I realize they still make Performer RPM head's slightly different than the SCCA legal one's would you consider that as an alternative Please let us know!Sincerely,
Gregg Ditzian
Reply With Quote
  #2  
Old 03-10-2020, 01:34 PM
fast2rev fast2rev is offline
Member
 
Join Date: Feb 2009
Posts: 10
Default

anybody remember what the edelbrock heads cost new?
Reply With Quote
  #3  
Old 03-10-2020, 01:36 PM
smithpr smithpr is offline
Senior Member
 
Join Date: Dec 2004
Posts: 563
Default

Gregg:

Thanks for the heads up. They have stopped making the SCCA heads. They have no Chevy heads on the shelf and one set of Ford Heads. No such luck at Jegs or Summitt. Did you check with Lane Automotive?

Based on discussions with the head of technical sales, the guy that helped us out 12 years ago, I think that there is a solution. BTW they sold 8 heads since 2016. New management has deleted over 100 heads. Very few bare heads are being sold going forward.

They have an NHRA head that they sell the heck out of which is a possibility but this will need to be reviewed and studied.

Last edited by smithpr; 03-10-2020 at 02:36 PM.
Reply With Quote
  #4  
Old 03-11-2020, 07:45 PM
mw85gt mw85gt is offline
Senior Member
 
Join Date: Feb 2008
Posts: 108
Default Ford Edelbrock heads

I did a little research tonight on the Ford Edelbrock AS heads:

p/n 602579 (Ford head with valves) in stock @ Summit
p/n 602479 (Ford bare head) 10 in stock at Hangar Racing, (amazon)

I would expect that this stock will be consumed quickly now that Edelbrock is no longer making these heads
Reply With Quote
  #5  
Old 03-11-2020, 09:01 PM
wre46's Avatar
wre46 wre46 is offline
Senior Member
 
Join Date: Oct 2007
Location: Silver Spring, MD
Posts: 619
Default Edelbrock heads

I have one bare casting that has never been run. We cut different valves jobs in it. Best offer

wre46llc@gmail.com
__________________
Jeff Werth
Reply With Quote
  #6  
Old 03-12-2020, 02:18 PM
Tim White Tim White is offline
Senior Member
 
Join Date: Nov 2004
Posts: 350
Default

Don't the standard Performer RPM head have a 2.02" intake valve and the AS head have a 1.94" intake valve? I guess we could go smaller, to the 1.90". If I read the rules correctly we can put 1.94" Intake and 1.55" Exhaust valves in any approved head, not just the spec head.

Last edited by Tim White; 03-12-2020 at 02:38 PM.
Reply With Quote
  #7  
Old 03-12-2020, 04:39 PM
PamRichardson PamRichardson is offline
Senior Member
 
Join Date: May 2006
Location: Rockville, MD
Posts: 805
Default 2.02 vs. 1.94 valves

Tim --

I believe you are correct. If I remember correctly, the only mod to the "special" make of that head for AS is that valve size reduction. (Please if I am incorrect, someone correct me!). And, I have also heard the reason that was done, was because the 2.02 valve would interfere physically with a 3.75" bore, aka, the Chevy 305 block.

Pam
Reply With Quote
  #8  
Old 03-12-2020, 07:15 PM
Airindy Airindy is offline
Member
 
Join Date: Aug 2017
Posts: 13
Default

Maybe they were cast in China (Corona.....)
Sorry peeps, I just had to....
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.