Go Back   American Sedan Forum > Classifieds > For Sale > Cars

Reply
 
Thread Tools Display Modes
  #1  
Old 11-05-2013, 07:36 PM
Bob Gebhardt
Guest
 
Posts: n/a
Default 1995 Mustang GT AS MOTIVATED!!!!

MOTIVATED SELLER!!!!

1995 Mustang GT A-Sedan (Uncle Jesse)

The good;
- Hansen Fabtech (dragracer) very professional 8-point cage which passes through the firewall to the strut towers and NASCAR bars on driver’s side.
- Subframe connectors welded to the floor
- 4 corner weight jackers on 2.5” ID coil springs
- Steeda – camber plates, bump steer kit, offset rack bushings, offset lower control arm bushings, 2” lowered ball joints, clutch quadrant, adjustable clutch cable.
- 3rd link with Fays2 watts link
- Driver and passenger kirkey seats
- Fresh T-5
- B&M short throw shifter
- Just barely above minimum weight with 300 lb driver.
- Runs on 87 octane pump gas (See below)

The blah:
- 3 sets of factory pony wheels
- Trunk mounted battery
- 15 gallon well cell
- Functional park lights (rain race)
- Fully functional intermittent wipers that actually park
- Tilt steering
- Power mirrors
- Wired for windshield defroster blower. Plenum removed, would need brake blower and hose.
-Wired for rear window defrost, but one of the terminals on the window broke off.
- Holley 650, Performer RPM intake, BBK 1-5/8” headers, Canton road race oil pan
- Factory trac-lok 8.8 with 4.10 gears and an extra shim to tighten the limited slip.
- Switched radiator and oil cooler fans.
- Stewart warner white face gauges (tach off brand)
- Warning lights for oil temp, coolant temp, fuel pressure, and charging
- MSD 6ALN ignition box, coil, and distributor

The not as good as I wish:
- Junkyard Frankenstein motor 302 with 1.5 seasons on it. Unkown “RV” cam which pulls real hard out of corners, but falls on it’s face on the top end. Floats the valves at 5500 rpm so you won’t need a rev limiter.
- Damaged driver front fender. Useable, but not pretty
- Minor rust on passenger quarter panel and rocker.
- Misc little dings, but still looks pretty good…or a couple weekends of TLC and it’ll be a pretty decent looking car.
- Fuel cell would need a second pickup or trap door setup for longer duration races. I ran Waterford Hills which are shorter sprint races.
- Factory 4 wheel disc brakes. Worked fine for shorter Waterford races, but may or may not hold up for longer races. Depends how hard you are on them…

$7500 is a good starting place.

I don't have regular access to the web so call w/ questions.

Bob Gebhardt
Detroit, MI
two-four-eight-336-9886


Reply With Quote
  #3  
Old 01-29-2014, 04:21 PM
Bob Gebhardt
Guest
 
Posts: n/a
Default Price Reduced! $6500

Reduced price of $6500. Needs to go!
Reply With Quote
  #4  
Old 02-27-2014, 12:18 PM
Bob Gebhardt
Guest
 
Posts: n/a
Default Price reduction - $5500

Come and get him! $5500

The cage alone was $3500!
Reply With Quote
  #5  
Old 03-15-2014, 10:22 AM
SMSchick
Guest
 
Posts: n/a
Default

Bob,
Is the car still available?

Scott
Reply With Quote
  #6  
Old 03-17-2014, 09:29 PM
Bob Gebhardt
Guest
 
Posts: n/a
Default

Scott,

Yes, the car is still available. I had one gentleman kick the tires pretty good the middle of last week, but I haven't heard back from him since our phone conversation.

Bob
248-336-9886
Reply With Quote
  #7  
Old 03-22-2014, 10:15 PM
Bob Gebhardt
Guest
 
Posts: n/a
Default Sold

SOLD
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.