View Single Post
  #1  
Old 09-19-2019, 09:16 AM
Dayle Frame Dayle Frame is offline
Senior Member
 
Join Date: Aug 2008
Location: DeWitt, MI
Posts: 75
Default 36' Gooseneck Trailer

I'm walking away from competition. It's been great fun over the years but it's time I moved on. As a result, I'm selling off my racing assets and one of them is the trailer. After a particularly gruesome towing incident with our 22' tag trailer, my wife DEMANDED that we get a gooseneck. I bought her new in 2006 for over $26k. Its has been a great workhorse. It tows like a dream and is bulletproof. It's not only carried us to all of our race events over the last 13 years, it has also used it to move people a few times.

Here is a link to a folder on my Google Drive that has pictures and a spec sheet. I'm asking $15k for it....with all the upgrades (new tires, winch, workbench w/ vise, tool cabinet, 760 ft2 of canopy, etc.) she's a pretty good bargain.

I'll be at the Runoffs so come by WG9 and I'll give you the nickel tour. Hell for an extra $7500, I'll throw in a Spridget roller too.

➢ 36 long, double axle, gooseneck trailer
➢ Light weight, all aluminum construction (dry weight of 5500 pounds)
➢ ~30,000 miles on it
➢ Stored indoors all year
➢ Beavertail rear door with folding extension
➢ Hydraulic center lifting post, manual crank outer posts
➢ 7500 pound, heavy duty, Dexter axles
➢ 4 wide side door
➢ Upgraded aluminum alloy wheels
➢ New Goodyear tires in 2016 (all 4)
➢ Two new hubs in 2017
➢ Breaker box for electrical system
➢ Landline lead for generator or shop power
➢ New 12v battery in 2018 with built in trickle charger
➢ Unused spare tire mounted inside
➢ 28 deck, 8 nose
➢ Two roof vents with 12v, three speed, bidirectional fans
➢ 4 pairs of D rings for tie downs
➢ 8 work bench with vise
➢ Hydraulic center lift foot and 2 speed, manual, outer lift feet
➢ Wired for 110v A/C unit
➢ Outdoor, flush mounted, LED lights to illuminate canopy area
➢ 110v fluorescent (4, 4 fixtures w/ twin bulbs) and 12v (4 fixtures w/ single bulbs) interior lighting
➢ 4 pairs of 110v outlets (2 above the work bench, 1 by the side door, 1 by the rear door)
➢ 12 x 30 and 20 x 20 canopies
➢ Craftsman, three section tool cabinet (bought new and installed in 2006)
➢ SuperWinch GP1800 with 20 wired remote controller (new in 2017)
➢ Indoor / outdoor carpet on nose floor
➢ Working area of deck floor (near tool cabinet, work bench) has anti-skid, abrasive tape

Email me offline at hdf3.wtr80@gmail.com if you have any questions.
_________________
Dayle Frame (259138)
Reply With Quote